Assessment of Suitability of Wood Fibres of Four Nigerian Fruit Trees for Paper–Making

Main Article Content

G. C. Ajuziogu
U. Nzekwe
H. I. Chukwuma

Abstract

Wood fibres of four fruit trees of Nigeria commonly found in Nsukka metropolis were studied and assessed for their suitability for paper-making. These trees include Mangifera indica, Anacardium occidentale, Persea americana and Dacryodes edulis. The parameters used in the study were the fibre dimensions and derived fibre values. The mean values for fibre length of the species ranged from 0.89 ± 0.34 mm in Persea americana to 1.15 ± 0.38 mm in Dacryodes edulis; mean fibre lumen diameter of 0.009 ± 0.001 mm in Anacardium occidentale to 0.014 ± 0.06 mm in D. edulis; mean fibre diameter of 0.023 ± 0.005 mm in P. americana to 0.026 ± 0.005 mm in M indica; mean fibre cell wall thickness of 0.004 ± 0.002mm in D. edulis and M. indica to 0.006 ± 0.002 mm in A. occidentale. For the derived fibre values, a mean Runkel ratio of 0.70 ± 0.03 in D. edulis to 1.35 ± .56 in A. occidentale. Coefficient of flexibility of 0.37 ± 0.08 in A. occidentale to 0.57 ± 0.17 in D. edulis and a slenderness ratio of 41.61 ± 20.31 in P. americana to 50.07 ± 14.79 in A. occidentale. Analysis of variance for the derived fibre values showed highly significant difference among the species. In consideration of the parameters – Runkel ratio and coefficient of flexibility, D. edulis seemed to have better paper making potentials than the other three.

Downloads

Download data is not yet available.

Article Details

How to Cite
Ajuziogu, G. C., Nzekwe, U., & Chukwuma, H. I. (2025). Assessment of Suitability of Wood Fibres of Four Nigerian Fruit Trees for Paper–Making. Journal of Biological Research and Biotechnology, 8(2), 679 – 681. https://doi.org/10.4314/br.v8i2.66889
Section
Articles

References

Ademiluyi, E.O. and Okeke, R.E. (1979). Studies on specific gravity and fibre characteristics of Gmelina arborea in some Nigerian plantations. Nigerian Journal of Science 13: 231-238.

Ajuziogu, G.C. and Uju, G.C., (2007). Quantitative anatomical characteristics in static bending strength of some commercial timbers of Nigeria. Bio-research, 5 (1): 158-164.

Anon, (1951). The Dictionary of paper. American Paper and Pulp Association, New York. 402 pp.

Anon, (1984). Chemical analysis of Nigerian grown timbers. In: Annual report of the Forestry Research Institute of Nigeria (FRIN) Dec., p 108 -109.

Chittenden, A.E and Rotibi, J.O. (1962). Studies on the suitability of Nigerian raw materials for pulp making, Gmelina arborea Research Report 17, 20 pp.

Coursey, D.G. (1963). The use of tropical hardwood plantation timber for pulp and paper- making. Paper submitted to the United Nations conference on the Application of Sciences and Technology to the Less Developed Areas.

Cutter, E.G. (1971). Plant anatomy: Experiment and interpretation part II-organs. Edward Arnold Publishers Ltd, London, 343 pp.

Grossley, N. and Ogunle, O.A (1965). Studies on the suitability of Nigerian raw materials for paper-making-African grass Vossia cuspidate. Griff Research Report 32, 25 pp.

Hurter, R.W., (2001). Non-wood plant fibre characteristics. Hurter Consults Inc. USA.

Keay, R.W.J. (1989). Trees of Nigeria. Clarendon Press Oxford, New York. 476 pp.

Keay, R.W.J, Onochie C.F.A and Standfield, D.P. (1964). Nigerian Trees Vol. II. Federal Department of Forest Research, Ibadan, Nigeria. 495 pp.

Kpikpi, W.M. and Olatunji, O.A. (1990). Wood anatomy consideration In deciding the suitability of some Nigeria hardwood for pulp and Paper production. Nigerian Journal of Botany 3:137-150.

Metcalfe, C.R. and Chalk, L. (1983). Anatomy of the dicotyledons (2nd ed.). Vol. II. Oxford University Press. 297 pp.

Ogar, W.N. (1990). Local sawing of pine in Nigeria. A paper presented At the Second National Conference of Pulp and Paper Society of Nigeria, Nigeria Paper Mill Ltd. Jebba, Kwara State, 3rd-6th October, 1990.

Okereke, O.O. (1962). Studies on the fibre dimensions of some Nigeria Timbers and other raw materials. Part 1 Research Report 16. Federal Ministry of Commerce and Industry. 31 pp.

Palmer, A.E (1986). Pulping trails on the Pinus spp. Tropical Product Institute 36: 10-13.

Sass, J.E. (1958). Botanical micro-techniques. The Iowa State University Press, Ames, lowa. 288 pp.

Uju G.C and Ugwuoke, E.C. (1997). Studies on the dimension and Suitability of wood fibres of selected tree species of the family Moraceae in paper-making. Nigerian Journal of Botany 10:7-13.

Similar Articles

You may also start an advanced similarity search for this article.